SA80 loading with ready, unloading and make safe

To load the SA80 simply ake the magazine and insert it into the magazine housing, making sure that the magazine is inserted properly.When loaded check the safety catch is to the right, pull the cocking handle to the rear and release with a forward assist. To unload the weapon check that the safety catch is to the right, then remove the magazine, after removing the magazine pull the cocking handle to the rear and do the seven point check from your NSP. then release the working parts fire off the action and return the dust cover to its orginal position. To preform a reload from an empty magazine remove the empty magazine and replace with a full one release the working parts and carry on firing. To carry out a make safe simply do a full unload followed by a load but making sure the dust cover is closed.