Famous Guns: Lucretia Borgia

Take a look at the two rifles in the image below:

Click on the image to enlarge.

The one we are going to study today is the one at the bottom. "Wait a minute", the reader says. "The rifle at the bottom seems badly damaged. Heck, it is even missing part of its stock!" Well, there is a bit of history associated with this particular firearm, which is why we are going to read about it today. First, here's another close up of this rifle:

Click on the image to enlarge.

It is a Springfield Model 1866 trapdoor rifle, otherwise known as the Springfield 2nd Model Allin Trapdoor Conversion Rifle, firing a .50-70 black powder cartridge. As you can see, there is extensive damage and wear or the rifle and the barrel is even a little bent. However, that doesn't mean that this rifle is worthless. In fact, it may be more valuable than the one above it, because of the fame of its original owner. Here's a picture of the person that owned this rifle in the past:

Public Domain Image

Yes, that is the famous American legend, William Cody, a.k.a Buffalo Bill Cody, holding the same rifle when it was in much better condition.

Even though this rifle is a single shot model, Buffalo Bill preferred using this to the faster firing lever action .44 Henry Rifle and the Sharps 'Big Fifty' rifle. Buffalo Bill Cody never revealed how he came upon the rifle, but it is believed that he was issued the rifle when he served in the US Army during the Civil war and took it with him when his service ended. This is certainly possible, as thousands of Springfield Model 1866 rifles were issued to US troops during that time.

Buffalo Bill used this rifle in many encounters with Native American tribes, as a scout and as a commercial hunting rifle, when he worked as a contractor to supply meat to the railroad workers. It was used in a famous shooting contest between him and William Comstock, to see who could shoot the most buffalo in a given time. After this contest, people began calling William Cody as "Buffalo Bill".

So, why the name "Lucretia Borgia"? Well, the real Lucretia Borgia (or Lucrezia Borgia) was a famous Italian lady, from the powerful Borgia family, who were very politically connected and even had a few members serving as popes and cardinals in the Vatican. The Borgia family had origins in Spain and became prominent during the Renaissance period in Italy. Lucretia Borgia was known as a beautiful woman, with a reputation for being deadly (she was alleged to have poisoned several people). Many stories were written about her, including a famous play by French playwright, Victor Hugo, called Lucrezia Borgia. This play was staged at various places during the US Civil War, including Leavenworth, Kansas, where Buffalo Bill is alleged to have seen it.

For hundreds of years, it has been common tradition for men to bestow female names to their favorite tools and possessions, and Buffalo Bill was no exception in this regard. Buffalo Bill saw his rifle as beautiful, but deadly. So, when it came to naming his rifle, he named it after a famous woman who was known to be beautiful and deadly: Lucretia Borgia! In fact, he had the name inscribed in the lock plate of his rifle, where it may still be seen today. This seems to have been his favorite rifle as he mentioned this rifle in several interviews and in his autobiography and has even been photographed with it.

As to how part of its stock disappeared, there are a couple of stories associated with it. One story is that Buffalo Bill had shot an elk or a bison with his rifle and tried to finish it off with a blow to the animal's head, but the stock broke when he did this. Another story says that when he was employed as a hunting guide to Grand Duke Alexis of Russia, he loaned this rifle to the Grand Duke to use. Apparently, the Grand Duke got a little excited after shooting a buffalo during the hunt and threw his rifle in the air to celebrate, but failed to catch it on the way down and his horse stepped on it after it hit the ground.

Lucretia Borgia may be seen today on display at the Buffalo Bill Center of the West Museum in Cody, Wyoming.

High Quality Winchester Model 1873 Rifles

A long time ago, we studied lever actions and one of the most famous lever action weapons was the Winchester Model 1873 rifle.

Winchester Model 1873. Click on the image to enlarge. Image courtesy of http://www.adamsguns.com/

This rifle was extremely popular with settlers and cowboys in America and became known as "the gun that won the west". It was manufactured for 46 years between 1873 and 1919 and during this time, 720,610 rifles were made. Bear in mind that the entire population of the United States was around 70 million people at that time, so this means it was an extremely popular rifle.

The reader should note that this was not a long-range rifle at all. The cartridges it used weren't very powerful and accuracy was not the best -- your average Model 1873 rifle couldn't put 5 shots into a dinner-plate sized target at 100 yards. So what was good about this rifle that made it so popular then? Well, it was a rugged design, and it used the same cartridges as revolvers, so that the user only needed to carry one type of cartridge for both weapons. Also, many users didn't need pin-point accuracy and the rifle was powerful and accurate enough to be used to hunt deer or for self-defense. The lack of accuracy and power was more than made up for by its ability to shoot rapidly and the large capacity of its magazine. It was also relatively cheap.

However, in 1875, Winchester began to offer higher grade versions of the Model 1873 for sale. Every Winchester rifle barrel was test-fired in the factory, as part of the manufacturing process. Rifle barrels that shot with exceptional accuracy were set aside for special orders. These exceptionally accurate barrels were then handed over to the best workmen in the factory, to make customized models of the Model 1873. These rifles were made with set triggers, case hardened parts, extra-fine quality of finish, high quality walnut stocks with checkering, fancy engravings on the metal parts etc. The best quality barrels were engraved with the lettering "One of One Thousand", or "One of 1000". The second best quality barrels were engraved with the lettering "One of One Hundred".

Three Winchester "One of One Thousand" rifles and a "One of One Hundred" rifle.

Winchester catalogs from that period were quoted as follows:
"The barrel of every sporting rifle we make will be proved and shot at a target, and the target will be numbered to correspond with the barrel and be attached to it. All of these barrels that are found to make targets of extra merit will be made up into guns with set-triggers and extra finish and marked as a designating name, "One of One Thousand," and sold at $100.00. The next grade of barrels, not so fine, will be marked "One of One Hundred" and set up to order in any style at $20.00 advance over the list price of the corresponding style of gun."

The price of an ordinary Winchester Model 1873 rifle around 1880 was around $20. The "One of One Thousand" rifles were sold at a list price of $100 each and the "One of One Hundred" models were sold for around $40 each. Considering that the price of one acre of best quality farmland in Kansas was $11, these higher quality firearms were quite expensive and only rich people could afford to buy them.

While the fine walnut stock with checkering, case hardened parts and set triggers were standard with these higher-end rifles, the factory also offered custom upgrades for extra. For instance, a person could add special upgraded walnut stocks, long range sights, silver or gold finish, custom engravings and monograms etc. Since many of the owners of these higher-quality rifles were quite rich, these rifles were often upgraded with these extra options.

Winchester only manufactured 132 rifles of "One of One Thousand" quality (some sources say 133 or even 136 rifles.) The "One of One Hundred" rifles are even rarer, only 8 were ever produced, as per the Winchester factory records.

In 1950, Hollywood produced a popular western movie called "Winchester '73" starring James Stewart, where the story involves a "One of One Thousand" rifle. As part of marketing this movie, Universal Pictures published advertisements in many papers, for a contest to find the remaining "One in One Thousand" model rifles. Due to their efforts, 61 "One of One Thousand" rifles of Model 1873 and 6 more of the Model 1876 have been located. Of the "One of One Hundred" rifles, only 6 of the 8 that were manufactured, have been found.

When the "One of One Thousand" rifles hit the market, they were priced at $100 each. Today, one of such rifles could easily sell for over $100,000 or more. The "One of One Hundred" models are even more expensive, since only 8 were ever made, therefore the selling price of one of these is much more. By contrast, an ordinary Winchester M1873 from that period sold for around $20 then and would sell for around $3,000 - $4,000 today.

5.56mm vs. .223 Ammunition Revisited

Many months ago, we studied the differences between the 5.56mm. and the .223 cartridges. In that article, it was mentioned that the dimensions of the 5.56x45mm. NATO cartridge and the .223 Remington cartridge are almost identical. One reader of this blog, Mr. Mark Rohrer, recently commented in that article that he did the math and found out:

.223 in. and 5.56 mm are NOT the same diameter; .223 in. maths to 5.6642 mm and that is a significant difference of 0.1042 mm.

And if you do the calculations yourself, you'll notice that he's right (click here to verify, or you can calculate it yourself by knowing that 1 inch = 25.4 mm., therefore .223 inches = .223 * 25.4 = 5.6642 mm.). Also, if you do the calculations to convert 5.56 mm. to inches, you'll find that it is approximately .219 inches, not .223 inches.

So what is going on here? If .223 inches is bigger than 5.56 mm., how are the dimensions of the two cartridges nearly equal? This article explains everything about this mystery.

First, we go back to another article from a couple of years ago, where we studied how cartridges get their names. It was mentioned there that in the US, we tend to name cartridges after the groove diameter of the rifle barrel, rather than the diameter of the bullet, at least since around 1950 or so. On the other hand, in Europe (except in the UK), they tend to name their ammunition after the bore diameter of the rifle barrel. Since the specifications of the 5.56x45mm. cartridge came from Belgium, that means that the 5.56 part refers to the bore diameter of the barrel. And since the .223 was developed in the US off of a Remington cartridge, .223 refers to the groove diameter of the barrel.

So what is the bore diameter of a rifle (e.g. M16) that fires the .223 cartridge. Well, it just happens to be .219 inches, which translates to about 5.56 mm. when you convert it to millimeters. And the groove diameter of the same rifle barrel is .223 inches. So now we see where the 5.56 and .223 figures come from.

Now if you look at the specifications of the bullet in a .223 cartridge, the diameter of the bullet is actually specified as slightly larger than the groove diameter of the barrel. In fact, the diameter of the bullet is specified as .224 inches (or 5.70 mm. in metric). Now look at the actual dimensions of the two cartridges as specified by C.I.P standards. First, we have the specifications for a .223 cartridge:

Dimensions of a .223 cartridge per the C.I.P standards. Click on the image to enlarge.

Image licensed under the Creative Commons Attribution 3.0 Unported License by Francis Flinch.

The dimensions of this cartridge are specified in mm., in the above image, so we can easily compare it to the next image, which happens to show the specifications of a 5.56x45mm. cartridge per the C.I.P standards:

Dimensions of a 5.56x45 mm. cartridge per the C.I.P standards. Click on the image to enlarge.

Image licensed under the Creative Commons Attribution 3.0 Unported License by Francis Flinch.

As you can see, the external dimensions of the two cartridges are almost identical. In particular, note the diameter of the bullet (marked in both images as ⌀G1), which happens to be 5.70 mm., which translates to .224 inches (actually, both images show it as "5,70", but in some European countries, they use the comma where we use the decimal point and vice versa, so they write "5,70" where we write "5.70". Also, in engineering drawings, the convention is to use the diameter symbol (i.e.) ⌀, to denote the diameter of the object at that location.)

From the above images, the reader can see that not only are the bullet diameters identical, so are the external dimensions of most other parts of the two cartridges as well. The differences between the two really have to do with the internal dimensions, case thickness and pressures generated, as this article that we studied previously explains.

Early Cartridge Technologies: Skin Cartridges

In our last post, we looked at tinfoil cartridges, which was one way to make cartridges more resistant to water. In today's post, we will look at another material that was also used to make cartridges more water resistant: animal skin. We will study skin cartridges today.

Skin cartridges

First, the name is somewhat misleading because skin cartridges were not really made of skin. They were actually made of animal gut, mostly cattle, sheep and pig intestines. The intestines were first soaked in a weak solution of potassium hydroxide (i.e. lye solution), which would remove the fat and inner mucous membrane from the gut and prevent further putrefaction. The intestines were then beaten thin and stretched over formers made of wood or metal to dry out. After drying out, the intestines would form seamless cases that could be filled with black powder. The cases were formed as conical shapes, so that they could be easily dropped into the chambers of a revolver or a rifle for faster loading. The cases were then treated with combustible chemicals such as potassium nitrate, so that they would burn during ignition and leave very little residue behind in the chamber. After filling the cases and adding the bullets, the cartridges were then treated with a little shellac varnish to make them water resistant.

Skin cartridges were used mainly in Colt revolvers and also in the Sharps rifle. They were famously used by Colonel Berdan's sharpshooters during the Civil war.

Skin cartridges made by D.C. Sage. Click on the image to enlarge.

Two inventors, William Mont Storm and Julius Hotchkiss developed separate patents to improve skin cartridges. An example of cartridges made using Hotchkiss' patent is shown above. The Mont Storm patent shows an improved way to make cases, as well as using gutta-percha dissolved in rectified naphtha or chloroform, instead of shellac to provide the waterproof varnish. The Hotchkiss patent uses a different technique to improve the toughness of the animal gut so that it doesn't split easily and it also dispenses with the thread wrapping that was sometimes used by others to strengthen their cases.

Over in England, Captain John Montagu Hayes of the Royal Navy received British patent # 2059 of 1856, for a skin cartridge. The patent specification reads in part, "A skin or membrane (prepared from the gut of animals, as pigs, or birds, or reptiles) is used instead of paper for cartridges, which are made without a seam. A covering or network of thread may be used to strengthen the cartridge." (this thread wrapping is what was improved by the Hotchkiss patent in the previous paragraph)

 A skin cartridge of British manufacture, made by Eley Brothers. Click on the image to enlarge.

The above images shows a skin cartridge made by the British cartridge manufacturer, Eley Brothers, who we learned about in our last post. Like the tinfoil cartridges we studied previously, this cartridge partly uses the Colt-Eley patent: it has an outer wrapper made of paper, with a tape to quickly pull the cartridge out of its outer paper wrapper. The paper wrapper is clearly visible in the image and the skin casing is inside it.

The above image shows five American made skin cartridges for .36 caliber revolvers. From left to right, we have cartridges for Remington, Savage, Colt Navy, Colt Navy and Colt Pocket revolvers. 

In America, major manufacturers of these cartridges were Johnston & Dow, Hazard Powder Company, Elam O. Potter and D.C. Sage.

Skin cartridges made by different American manufacturers. Click on the images to enlarge.

Like the other combustible types of cartridges, skin cartridges rapidly fell out of fashion when the first metallic cartridges were invented.

Early Cartridge Technologies: Tinfoil Cartridges

In our last post, we studied linen cartridges. In today's post, we will study cartridges made of a more exotic material: tinfoil. Yes, there really were tinfoil cartridges made at one point.

Tinfoil cartridges were originally made by Samuel Colt for his revolvers. During this period, paper cartridges were common, but if the paper got wet, it would ruin the black powder. The idea behind using tinfoil was to make a cartridge that was not affected by water as much.

At the time that Colt first started working on tinfoil cartridges, his first company that he had set up to manufacture Colt Paterson revolvers was not doing so well (it soon went bankrupt in 1842, due to lack of sales.) He initially experimented using rubber as the material, before switching to tinfoil. Soon after, the US Government got interested in his developments. In April 1840, the Secretary of War and the Secretary of the Navy asked a mixed board of officers from the Army, Navy and Marine Corps to make experiments and evaluate Colt's tinfoil cartridges. The officers were: Colonel G. Croghan of the Army, Captain C.S. McCauley of the Navy and Lieutenant J.G. Reynolds of the Marines. They met at Washington Arsenal and performed several experiments and wrote a report of the results, an abridgement of which is below:

The board relying upon the correctness of the experiments as above recited, are unanimously of the opinion that in reference to the usual incidents of our service, naval as well as military, the cartridge now in use is greatly to be preferred to the tin-foil cartridge submitted by Mr. Colt. It appears evident from the facts set forth by the foregoing experiments that the tin-foil is entirely unsuited for cannon service; yet from its imperviousness to water, the tin-foil cartridges for small arms might be found useful in certain cases. The board would, therefore, recommend the partial adoption of the tin-foil cartridge for small arms.

The tests that they performed for these cartridges may be of interest to readers:

"Experiment 1, April 10, 1840: Twenty six cartridges of tin-foil and as many of paper, were fired from well cleaned muskets, no difference was perceptible."

"Experiment 3, April 20, 1840: Four 6-pounder and thirty musket cartridges, all of tin-foil, which had been immersed in water from the 10th instant, were taken therefrom; two of the 6-pounder cartridges appeared to have been injured by accident, the other two were fired and appeared not to have been injured by the water; a dry sponge was used in these firings, and it was burned each time by the contents left in the gun. The musket cartridges were then examined; sixteen of them were selected for firing, seven of which only could be discharged"

"April 21: In order to test the relative strength of the tin-foil and cartridge paper, strips of each were tested; the foil could not support a weight of forty pounds, whilst the paper did not break with the weight of eighty pounds"

Most of the remaining tests correspond to use in cannon and the tin-foil cartridges left more residue globules in cannon, which is why the board recommended to only use the cartridges for small arms and only partially.

The US Army purchased a few thousand more tinfoil cartridges for further evaluation and in 1843, they placed a large order for 250,000 tinfoil musket cartridges, for the purpose of trying them in field service. This large order was an unexpected gift for Colt, since his revolver manufacturing factory in Paterson had gone bankrupt shortly before in 1842. The funds from the US Army were used by Colt to fund research for his "New and improved revolver" and he attempted to start a new Colt's Patent Manufacturing Company with this money. He also used some of the money to produce a waterproof telegraph cable for his friend, Samuel Morse (the inventor of Morse code and inventor of the single-wire telegraph). Then came the order from Samuel Walker for the Walker Colt revolver and the profits were large enough for Colt to go back into the firearms manufacturing business in 1847. A few years later, Colt also established a factory in London in 1853.

While Samuel Colt was in London, he met a gentleman named William T. Eley, who was in the business of making cartridges in England. William T. Eley was the son of William Eley and nephew of Charles Eley, who had founded the Eley Brothers cartridge manufacturing company in London in 1828 (Eley Brothers later became the largest ammunition manufacturer in the world and the brand name is still used for cartridges today). Together, they developed a new tinfoil cartridge that was granted British patent #1324 in 1855.

The powder container was made of tinfoil and the lap joint sealed with waterproof cement. The case was then filled with powder and the bullet was inserted to the top and then the end of the tinfoil case was crimped into the base groove of the bullet and then greased, to produce a waterproof cartridge. The cartridge was then enclosed in a paper wrapper, from which it could be easily removed before loading. Due to the shape of the bore of the nipple in Colt's revolvers, the flame from a percussion cap would pierce the foil and ignite the powder, without the need to tear open the foil.

In the above image, the cartridge on the right is of .31 caliber. The one on the left is also a .31 caliber cartridge, but it is enclosed in an additional protective paper case. The one in the middle, is a .28 caliber cartridge in a sectioned case. The case has a tape to pull the cartridge out, which was later copied by other ammunition makers. The side of the case visible to us says "COLT'S" and has a picture of a colt in the bottom, the other side has the word "PATENT".

Another image of a Colt tinfoil cartridge is shown below:

To manufacture these cartridges in the US, Colt set up a separate building, situated about a half mile away from his other factory in Hartford. In this cartridge manufacturing factory, no fire was allowed anywhere near it and the factory was heated by piping in steam, which was generated in a different building outside.

Women doing the dangerous work of assembling Colt's gunpowder cartridges at the Cartridge Works. From United States Magazine, 1857

Click on the image to enlarge. Public domain image.

Most of the labor in this factory was performed by women, with the only men around being a foreman, an engineer and a charger.

In our next post, we will study more cartridges made of other materials.

Early Cartridge Technologies: Linen Cartridges

A few weeks ago, we began to study an early form of cartridge: the paper cartridge. Where we left off, paper cartridges had advanced to the point where the paper was treated with chemicals to make it more combustible.

The main problems with paper cartridges are that they aren't very water resistant and the paper is somewhat fragile. As the bullet could be rather heavy, the weight of the bullet could cause the paper to tear as well. There was a need for a cartridge to be made of a more durable material and that's when the linen cartridge was born.

A .52 caliber linen cartridge for a Sharps rifle. Click on the image to enlarge.

In 1852, American inventor Christian Sharps invented a linen cartridge, to go with his Sharps rifle (which was earlier invented in 1848). The linen cartridge was a great improvement over the paper cartridge because it could withstand rough handling better, without breaking open. A linen cartridge also held its shape better than a paper cartridge could. The back of the linen cartridge had a piece of nitrated flash paper (which we studied in the last post) to provide the ignition. The linen used to make the cartridge body was treated with starch to make it stiffer. Linen cartridges were also treated with chemicals to make the linen more combustible, similar to that of paper cartridges that we studied earlier. Like the paper cartridges, the bullet was glued on top with sodium silicate glue.

For a while, cartridges were made for the Sharps rifle with both paper and linen, but the linen cartridge gradually started to find some backers. In the words of a Major W.A. Thornton:

"The making of Sharps Cartridges with paper must be abandoned and linen must be used in the formation of the cylinder. More care cannot be given in the making of cartridges than is bestowed in our laboratory. The fact is that the ball is too heavy for the paper, and worse than that -- the paper is sometimes softened by the lubric which causes it to break by the weight of the ball. From this date, I will make no more of paper, but I will make the powder cylinder of linen."

What the Major is describing are two flaws of the paper cartridges used by the Sharps rifles. The first is that the weight of the bullet is so great that a paper cartridge cannot hold its shape and often tears open by itself, due to the weight of the bullet. The second problem is that the lubricant (spelled in his letter as "lubric") also softens the paper and weakens it, thereby causing the paper to break. Since the lubricant is necessary to reduce the fouling inside the barrel, a stronger material must be used for the case body and this is why linen was used.

Linen cartridges were used by both the Sharps rifle and the Starr carbine during the Civil War.

In our next post, we will study another durable material that was also used to make cartridges during that period of time.

The Pencil Test

Imagine you're looking at a used pistol with an intent to purchase it. If it has been well used, chances are that some parts may be worn out or broken. One part, in particular, is the firing pin, which may be broken, bent, blunted etc. Another part of interest is the mainspring, which may have lost some of its strength. Or perhaps you stripped your pistol in order to clean it, and you aren't sure if you put it back together properly. There is a simple test to verify that the firing pin and mainspring are working satisfactorily and this test is the pencil test, which we will study about today. The only tool you'll need to conduct this test is a pencil with an eraser tip on one end:

A standard #2 size pencil. Click on the image to enlarge. Public domain image.

1. First, make sure the pistol is empty.
2. Cock the pistol, making sure that it is still empty.
3. Insert a pencil with the eraser end first into the barrel and push it as far as it will go (do not force it, just push it in gently). For best results, use a new wooden pencil (such as a standard #2 size pencil, like the one pictured above), with the eraser in good condition
4. Hold the pistol vertically, with the barrel end aimed upwards.
5. Make sure that the pistol is indeed empty, then pull the trigger.
6. If the firing pin and mainspring are working correctly, the pencil will move noticeably. In many pistols models, the pencil will actually come shooting out of the barrel. If the pencil doesn't move, or only moves weakly, there may be a problem with the firing pin or mainspring.

This test works on various pistol models, both hammer-fired and striker-fired types. Of course, the distance that it comes shooting out of the barrel depends on the model of pistol and also the wear and tear of the parts. For 1911 pistols in good condition, the pencil should come flying out and go at least a few feet up in the air. Glock pistols will also propel the pencil out a good amount of distance, but generally not as far as a 1911. Of course, the test also depends on the shape of the firing pin and the hardness of the eraser. For instance, in some models of M&P pistols, the firing pin may pierce the eraser instead of shooting it up. In such cases, if the pencil is put in with the unsharpened end in first, it may come flying out better. Alternatively, a plastic ballpoint pen, such as a Bic, may be used. In general, hammer fired pistols tend to propel the pencil out farther than striker fired models.

For pistols that are equipped with decocking levers (such as Sig Sauer, Ruger P95, Beretta M9 etc.), a similar test may be used to ensure that the decocking safety mechanism is working properly. As before, the pistol is cocked and the pencil is pushed in as before and the pistol is held vertically. Then, instead of pulling the trigger, the decocking lever is pushed instead. If the decocker is working correctly, the pencil should not move at all. If it moves, that means the decocker is not working properly and the firing pin is contacting the eraser.

Now on to some videos, so that you can see what it looks like.

The first video is from user Sadie Thorne on youtube and shows a quick test with a 1911 type pistol.

This video comes with no explanation, but shows the test very nicely. Notice how far the pencil comes flying out of the barrel, when the trigger is pulled.

The next video is by stdlfr11 and shows the same test done using a CZ-75 pistol.

This video has the user giving an explanation of the test, as it is being done. Note that while the pencil moves noticeably, it doesn't move as far as the one in the previous video. The reason for this becomes clear when the user pulls the pencil out as you can clearly see the indentation that the firing pin made on the eraser, which could explain why it didn't fly out as much. If the eraser had been harder or if the user had put the pencil in with the unsharpened end first, it would probably have flown out of the barrel much better. The test does show that the firing pin is functional and is not broken.

So there you have it, a simple test using a pencil ensures that the firing pin and mainspring are working satisfactorily.

Early Cartridge Technologies: Paper Cartridges - III

In our last post, we saw the advances in paper cartridge technology to handle expanding bullets. In today's post, we will study more advances in paper cartridge technology around the time that percussion caps and revolvers started becoming popular.

Early Colt Paterson revolvers. Click on the image to enlarge. Public domain image.

With the advent of percussion cap revolvers, such as the Colt Paterson models pictured above, most people loaded their revolvers from paper cartridges exclusively. The paper cartridges were therefore modified a bit to take advantage of these new developments in firearms.

In the picture above, note that the two Colt Paterson 1839 model revolvers have a loading lever under the barrel, whereas the 1836 model doesn't have this feature. We will see how that is used with the cartridges that we will study today.

Paper cartridges for a .36 caliber Colt revolver.; Click on the image to enlarge

As you can see in the images above, the bullet is now in the front of the cartridge (unlike the designs we studied in our last post). The bullet is attached to the cartridge with glue. Also, the shape of the cartridge has changed a bit, so that the paper part now forms a conical shape instead of a cylindrical shape. This was a deliberate design choice, so that it is easier for the user to insert the cartridge into the front of the cylinder. Unlike previous designs, there is no need to tear the paper and pour the powder into the chamber. Instead, the loading lever is used to ram the entire cartridge into the chamber. Because of the shape of the cartridge, the cartridge paper automatically tears open when it is compressed into the chamber. Some cartridges were equipped with a protective outer layer around the cartridge, to keep it safe from moisture, and these would have a tiny tear tab to remove the outer layer before loading the cartridge.

A glue made of sodium silicate was used by the Colt Manufacturing Company to hold the bullet to the cartridge, as well as seal the paper part. This was what was used by Colt between 1851 to 1873, until they started to produce brass cartridges in 1873. Sodium silicate has the advantages of resisting high temperatures, as well as being cheap and easily available. Sodium silicate was also used to cement the top wad of shotgun shells and was heavily used by American farmers who reloaded their own shells in the 1870s, as sodium silicate was the same material used to preserve eggs as well.

One more innovation made to these cartridges was to the paper material as well. In order to make the ignition of the powder more reliable, the paper was treated with chemicals to make it burn better. This paper is called nitrated paper, as it is manufactured by soaking it in a solution of potassium nitrate and then drying it. This treatment makes the paper much more flammable than ordinary paper. Such cartridges are called combustible cartridges, because the paper burns almost completely upon ignition. A properly nitrated paper leaves behind less ash and residue, thereby making it easier to clean and reload the weapon.

Another formula for making combustible paper used a solution of nitric and sulfuric acids and was used by both Colt Manufacturing and Dow Chemicals, as well as some other manufacturers in the 1800s. These are essentially the same chemicals used to produce guncotton, which we had studied a few years before. Paper that is treated this way is called flash paper. This paper also burns quickly and leaves very little ash behind, but it is much more unstable than nitrated paper, and in the early days, it was also prone to spontaneous combustion. This is why flash paper did not gain much popularity in the firearms industry. These days, the only people using flash paper are magicians, who use it to produce spectacular flames when performing magic tricks.

With the advent of metallic cartridge technologies, the use of paper cartridges started to reduce. However, there are still some applications for which paper is used. For instance, until about 1960 or so, many shotgun shells were made of paper bodies, with a brass base and rim. The reason for this was because it was cheaper and easier to make the body out of paper than to make the entire shotgun shell out of brass. Around 1960, shotgun shells started to use plastic bodies instead of paper, and a majority of modern shotshells today make use of plastic. Nevertheless, it is still possible to buy paper shotshells even today.

The bodies of these cartridges are made of a cardboard paper and are coated with wax to provide some resistance to moisture. They aren't as common as they were back before 1960, but there are still some manufacturers making them.

AMAZON.COM - FRIENDS / VIEWERS - CAN YOU HELP?

Hi, this is a strange request from me but are you an Amazon.com purchaser? if yes and you'd like to help me out theres a way!
All you have to do is when you go to shop on Amazon.com do its through my blogs links / ads, you DO NOT need to buy the actual product from the link, just use the link to go to Amazon.com then search and buy and for each purchase I get a small advertisers fee, any link will do too as long as its a proper link - like the header at the top of this page or the many self defense items dotted around the website, or this one below :


If you buy any products through the link it will help massively, like I mentioned it doesnt need to be sporting goods if its a sporting good advertisement, just click the link when you want to buy from Amazon then go to amazon, and search for what you want as normal, for every dollar you spend I get a fee of something like 4% to 6%.

I hope a few of you can help out as this is the only way I can make money from youtube and blogger now.

Thanks, its highly appreciated!

Mike

Ganzo G704-G Axis Lock Knife - £8.28

Ganzo G704-G Axis Lock Knife - U.K - £8.28 OR U.S.A - $12.59

CLICK HERE FOR THE 62% OFF DISCOUNT PRICE - £8.28

Basically a Benchmade H&K 14205 Clone, if you want really decent knives for very cheap prices check out the link above, this knife come is Army Green only, but others they do come in multiple colours, the axis lock works great and the whole thing feels really well built, as good as knives costing 5 or 10 times as much.
You cannot lose at this price, its insane, the best thing is if you can't afford a benchmade then get this, or if you have a bench made and you don't want to use it, buy this and mess around with this one instead.
its very comfortable, opens very smoothly, extremely well built and very cheap.

A must buy in my opinion

Heres a video with some more info -

Info:
Brand: GANZO
Type: Multitools
For: Camping, Daily Use, Climbing, Hiking, Adventure, Home use
Lock Type: Axis Lock
Blade Edge Type: Fine
Blade Material: Stainless steel
Material Detail: Blade: 440C stainless steel
Feature: Axis locking, Pocket size, With hanging clip

Specification
Blade Length: 8.5 cm / 3.35 inches
Blade Width : 3.1 cm / 1.22 inches
Unfold Length: 20.0 cm / 7.87 inches
Fold Length: 11.5 cm / 4.53 inches
Color: Green

Dimension and Weight
Product weight : 0.145 kg
Package weight : 0.183 kg
Product size (L x W x H) : 11.5 x 3.7 x 1.3 cm / 4.52 x 1.45 x 0.51 inches
Package size (L x W x H) : 13.5 x 6.0 x 3.7 cm / 5.31 x 2.36 x 1.45 inches

Product link below
http://goo.gl/HXAg4k

Early Cartridge Technologies: Paper Cartridges - II

In our last post, we looked at the earliest forms of paper cartridges. In today's post, we will look at more developments in that field.

As firearms technologies improved, smoothbore muskets began to be replaced by rifled barrels for greater accuracy. The invention of expanding bullets, such as the Minie bullet, made it possible for firearms to not only shoot accurately, but also improved the gas seal without the need for thicker wadding, because the bullet would expand and produce the gas seal itself. The main problems to solve here were to reduce the amount of fouling produced by the black powder and lead from the bullet, as well as to keep the cartridges from being affected by bad weather. The solution to both these issues was to provide a coating to the paper cartridge case, in the form of a mixture of beeswax and tallow. This coating allowed the cartridge to be somewhat water resistant, as well as provided lubrication to the bullet.

The lubricant made it easier to push the bullet down the barrel of the muzzle loader and also softened the residue inside the barrel, so that most of it could be pushed out of the way easily when reloading. This helped reduce the problem of powder fouling in the barrel, though it did not solve it.

Since the bullet expanded and provided the tight seal on firing, the paper needed to be thinner than previous paper cartridges, so it could fit between the bullet and the barrel properly. However, the thin paper could cause the body of the cartridge to not be sturdy enough. To get around this problem, cartridges were often made using multiple layers of paper, some thick and others thin. The following instructions and illustrations are taken from an instruction manual dating back to 1853 for the Enfield rifle. The manual explains that soldiers might find themselves in the position of having to make their own cartridges in the field, and therefore the manual shows how this was done.

Three separate papers used to manufacture an Enfield cartridge. Public domain image. 

Tools used to manufacture the Enfield cartridge. Public domain image.

The first image shows the different paper shapes used to make a single cartridge, along with their sizes. The paper shape on the right (labelled as "stiff paper") is made of a thicker paper material and forms the body of the cartridge and gives it the strength, so that the cartridge does not deform easily. The paper shape in the middle (labelled "inner envelope") is made of a thinner paper material. It wraps in a thin tube around the thicker paper and then blocks it on one end, thereby separating the powder from the bullet. The third piece of paper on the left (the "outer pattern") is also made of a thinner paper material. It wraps around the bullet and the other two tubes, thereby enclosing the bullet and powder in one packet.

To manufacture one of these cartridges, the instructions are as follows:

1. Make the powder case: This is done by rolling the "stiff paper" pattern tightly around the mandrel around 2.5 times. The mandrel is laid opposite to the side AB, with the base of the mandrel head coinciding with AD. After the "stiff paper" is rolled around the mandrel, the "inner envelope" paper is placed on top of it and rolled around it. The second paper overlaps the first one, so the excess is pushed into the hollow at the base of the mandrel, making use of the point to adapt the paper to the cavity which is to receive the point of the bullet, being careful to secure the bottom of the powder case, so that no powder can escape from it.
2. Attach the bullet to the powder case: Put the point of the bullet well into the cavity of the powder case. Then roll the "outer envelope" paper tightly around the bullet and powder case, with the mandrel still in it. Then twist or fold the overlapped paper as close as possible to the base of the bullet. Then place the base of the cartridge on the table and withdraw the mandrel carefully from the other end, by pressing the powder case with one hand, while pulling the mandrel with the other, the aim being to not separate the powder case from the bullet. The powder case must be kept as close to the bullet as possible, otherwise the cartridge will not be usable.
3. Charge the cartridge case: Place a funnel at the mouth of the cartridge case and pour in about 2.5 drams of black powder, or a lesser quantity, according to the firearm used. Remove the funnel, being careful that none of the powder escapes between the inner and outer envelopes and then secure the charge by squeezing the tops of the two envelopes close to the top of the stiff paper of the powder case, and then giving them a slight twist with inward pressure, laying the ends on the side of the cartridge. Three slits are made in the outer envelope to facilitate its detachment when fired.

The next picture is in color and shows how these three papers combine together in a complete cartridge:

Internals of an Enfield cartridge from the 1850s. Click on the image to enlarge.

Public domain image courtesy of user Zerodamage at Wikipedia/

4. Lubricate the cartridge: In this step, the base of the cartridge case is dipped up to the shoulder of the bullet, into a lubricating mixture composed of 5 parts of beeswax and 1 part of tallow.

A complete Enfield paper cartridge. Public domain image.

Cartridges were then packed in bundles of ten, and each packet was labelled as shown below.

The second line indicates that these cartridges are for the Enfield model 1853 rifle musket. The next line indicates that the bullet is of .55 inches in diameter. The word "wax" is to indicate the composition of the lubricant and the three horizontal lines after that indicate that the outer paper layer has the three cuts (as detailed in step 3). The next line indicates how much black powder is in each cartridge (2.5 drams) and the last line indicates that each bullet has a plug made of wood in its base and this plug enables the bullet to expand when the cartridge is fired.

The packets were then tied together with strong twine and packed into barrels, by placing the packets around the sides of the barrel, with a cylinder of percussion caps being placed in the center, with the ratio of 75 percussion caps for every 60 cartridges in the barrel.

To load such a cartridge into a rifle, the powder end of the cartridge is opened by tearing the thin outer paper envelope and the powder is then poured into the muzzle of the rifle. Then the bullet end is inserted into the muzzle, up to the level of the thick paper tube, which is then torn off and discarded. The bullet and the remains of the thin outer envelope are then pushed into the barrel using the ramrod and the rifle is then cocked and prepared for firing.

Interestingly, the use of lubricated paper cartridges was one of the causes of the Great Indian Mutiny of 1857. The sepoy soldiers of British India were required to bite on the cartridges to open them, as part of the loading procedure. A rumor spread that the cartridges were greased with beef fat (offensive to Hindus, who are forbidden to eat beef) and pig fat (offensive to Muslims, forbidden to eat pork). There were already rumors that the British authorities were trying to destroy the religions of the Indian people and the rumors of the content of the cartridge grease convinced sepoys of the Bengal regiment that their fears were justified. This was cited as one of the causes for the mutiny to start.

In our next article, we will look at further improvements to the paper cartridge, as we enter into the era of revolvers.

Early Cartridge Technologies: Paper Cartridges - I

Since we were discussing cartridge rim types in our recent series of posts, your humble editor decided to go back in time to the first cartridges. We had already discussed paper cartridges some time back when this blog first started, but it might be nice to revisit that topic in detail.

A paper cartridge is simply a cylinder or conical shaped object made of paper and filled with a bullet, some black powder and sometimes, a lubricating substance (such as wax or lard). The paper was often of a thicker type. In later years, a special type of paper, called cartridge paper, was specially developed for this purpose. From a firearms perspective, one of the biggest advantages of paper cartridges was that it allowed the users to reload their firearms quicker than before.

According to W.W. Greener's book, The Gun and its Development, the use of paper cartridges has been going on for a while. It was stated that the soldiers of Christian I, Elector of Saxony (currently in modern Germany), were using paper cartridges in 1586. Interestingly, Christian I of Saxony was from the House of Wettin, some of whose descendants are the Royal family of the UK. Greener also states that in the Dresden museum, there are Patronenstocke and other evidence to show that cartridges were in use, as early as 1591 (since the book was written in the early 1900s and Dresden was bombed heavily in World War II, your humble editor is not certain if the specimens still exist there). Finally, an author named Capo Bianco wrote in 1597, that cartridges had long been in use among Neapolitan soldiers. In England, the British Patent office has a record from 1777, when one William Rawle patented several "instruments for carrying soldiers' cartridges". Therefore, we can see that paper cartridges have been in use for quite a while.

A typical paper cartridge. Public domain image.

As we studied a long time ago, most of the early firearms were muzzle-loading, with no rifling at all. Early cartridges for such weapons simply consisted of a paper tube with three pieces of thread: two threads tied on each end to seal the packet and a third thread somewhere in the middle to divide the paper tube into two compartments, such as the one in the image above.

The first compartment (the smaller one) contained the bullet (or bullets), which were spherical shaped because the muskets didn't have rifling. The second compartment (the larger compartment) contained a pre-measured quantity of black powder.

To load the musket, the user would use the following process:

1. Hold the musket level and open the cover of the flash pan.
2. Bite open the cartridge on the side containing the powder and pour a small quantity of the powder into the flash pan to prime it. Then close the cover of the flash pan.
3. Turn the musket up vertically and pour the remaining powder into the barrel.
4. Crumple up the paper and insert the ball and paper into the muzzle of the musket.
5. Use the ramrod to push the ball and paper down the barrel of the musket.
6. Prepare the musket for firing by cocking the flintlock mechanism.

Since the quantity of black powder in the cartridge is already measured in advance, this eliminates the  need for the user to measure the proper amount of powder during reloading. Also, since the bullet ball is already wrapped in the packet, the user doesn't need to search around in a separate bag to find a ball for reloading. As smoothbore muskets of the era were loaded with lead balls that were smaller than the diameter of the barrel, the cartridge paper also served as a patch to provide a good gas seal in the barrel.

Paper cartridges of this early type were generally designed with thicker paper, so that they could withstand rough handling.

It must be mentioned that black powder leaves a lot of residue in the barrel, therefore it becomes harder to push the ball in after every shot, until the barrel is properly cleaned. Also, black powder does not like damp conditions very much.

In the next part, we will look at some developments in paper cartridge technology that solved some of these problems, as well as handling newer firearm technologies, such as rifling.

Cartridges Rims: Rimmed vs. Semi-Rimmed vs. Rimless vs. Belted vs. Rebated - Part III

In our last couple of posts, we looked at a few cartridge rim types: the rimmed cartridge, semi-rimmed and rimless types. We will look at a couple more rim types in today's post: the belted type and the rebated rim type.

As we noted in our previous post, the basic problem with rimmed cartridges was reliable feeding from box magazines, as the cartridge rims would interfere with each other in this type of magazine. One way to solve this was to reduce the diameter of the rim, as we saw with the semi-rimmed type of cartridge. Of course, the smaller rim made it trickier to headspace the cartridge in the chamber properly. Around the same time, another type of cartridge was introduced in 1905 to solve both issues: the belted cartridge.

The belted cartridge design originated in England and was designed by the famous sporting gun manufacturer, Holland & Holland. A belted cartridge is similar to a rimless cartridge in that the rim is around the same diameter as the cartridge case and there is an extractor groove in front of the rim for the extractor claw to fit in and pull out a spent cartridge. The belted cartridge differs in that in front of the extractor groove, there is a raised ring in front of the extractor groove.

The belt acts similar to the rim for the purpose of headspacing the cartridge in the chamber properly. This design allows smooth feeding through box magazines, but also has the advantage of providing positive headspacing, just like a rimmed design. Most belted type cartridges are designed for high-powered hunting rifles.

Headspacing on a belted cartridge. Click on the image to enlarge. Public domain image.

The origin of this type of cartridge had to do with when black powder was being replaced by smokeless powders, specifically cordite. As we saw in the linked article about cordite previously, cordite is composed of long strings of a light brown color, which are packed into a cartridge case in bundles like spaghetti. The prevailing production method of these cartridges in England consisted of inserting small bundles of cordite into a straight-walled case, which was then necked down to the final shape and the bullet was seated. Because of the long strings of cordite, cartridge cases using this propellant tend to have long sloping shoulders.

A .375 Holland & Holland magnum belted cartridge

When these cordite cartridges were first developed, most rifles were still single shot designs, so they were designed as rimmed cartridges. However, as the bolt-action rifles started to become popular, there began a demand for proper feeding from box magazines and hence, the belted cartridge was developed. The first belted cartridge was the .400/375 Holland & Holland Belted Nitro Express cartridge, and it was specifically developed to compete against the German 9.5x57mm Mannlicher-Schonauer cartridge, which was being adopted by Holland & Holland competitor in England, Westley Richards. However, soon after, a German gunmaker named Otto Bock designed the 9.3x62 mm Mauser cartridge. This cartridge was made to be fired out of the Mauser M1898 rifle, which was designed to be mass-produced and cheaper than most British rifles at that time. The cartridge and rifle rapidly became popular with African hunters, because of its all-round capability to be used against animals ranging from the smallest antelopes to the largest elephants. In response to this, Holland & Holland developed the .375 Magnum Belted cartridge in 1912. The belted design allowed cases to feed and extract reliably in the tropical environments found in India and Africa. The .375 H&H Magnum rapidly became one of the most popular all-round hunting cartridges in the world, and in many regions of the world, it is considered to be the legal minimum caliber allowed to be used to hunt large animals.

Interestingly, in the US, the belted cartridge has become synonymous with the word "magnum" and there are several calibers of belted cartridges available, such as: .257 Weatherby Magnum, .300 Weatherby Magnum, .375 Winchester Magnum, .350 Remington Magnum etc.

Rebated cartridge: In this type of cartridge, the rim of the cartridge has a noticeably smaller diameter than the body of the cartridge case. The rim is only used for extraction purposes, and proper headspacing is achieved by using the cartridge mouth or bottleneck body shape. The rationale behind this type of cartridge is to offer increased case capacity (and therefore, more power), without changing the bolt face of the weapon and thereby, keeping most of the other parts of the weapon unchanged.

For instance, in the 1980s it was desired to increase the power of police pistols which use 9x19mm parabellum cartridge. In response to this, Evan Whildin, a vice-president of Action Arms, designed the .41 Action Express cartridge.

A .41 Action Express cartridge on the left, compared to a 9x19mm Parabellum cartridge on the right.

Click on the image to enlarge. Public domain image.

The image above shows a .41 Action Express (.41 AE) cartridge on the left, compared to a 9x19 mm. Parabellum cartridge on the right. The reader will immediately notice that the cartridge on the left is fatter and longer, but what is interesting to note is that the two cartridges have the same sized rims at the bottom. In the case of the .41 AE, since the case body is fatter, the rim is actually smaller diameter than the case body.

The idea behind the .41 AE was that it allows converting a 9 mm. pistol to use this cartridge, merely by replacing the barrel, mainspring and magazine. Since it has the same sized rim as the 9x19 mm., the other parts of the pistol, such as the extractor claw, bolt, firing mechanism etc., can be reused and therefore, it keeps the total cost of converting the weapon relatively low.

However, when it was introduced, many of the ammunition manufacturers backed the .40 S&W cartridge, which had similar performance, and therefore the .41 AE cartridge didn't become popular. Nevertheless, the idea of using a rebated rim cartridge to interchange with another weapon stayed on. For instance, the .50 Action Express (.50 AE) cartridge is designed to be used with the American/Israeli Desert Eagle pistol. The rim of the .50 AE is the same diameter as the .44 Remington Magnum cartridge, which was the most common caliber cartridge used by the Desert Eagle. By interchanging only the barrel and magazine, a Desert Eagle originally designed for .44 magnum, can be used to fire the .50 AE cartridge.

Other cartridges that use a rebated rim design include Winchester Short Magnum, Remington Ultra Magnum, Winchester Super Short Magnum, Remington Short Action Ultra Magnum, the .50 Beowulf etc. The .50 Beowulf has the same sized rim as the 7.62x39mm cartridge used by AK-47 and AKM rifles and is designed to be used by modified AR-15 rifles.

Happy Halloween everyone and stay safe!

Cartridges Rims: Rimmed vs. Semi-Rimmed vs. Rimless vs. Belted vs. Rebated - Part II

In our last post about various cartridge rim types, we looked at the rimmed cartridge. As we noted in the last post, rimmed cartridges are some of the earliest metallic cartridges developed and they work very well with revolvers and shotguns and rifles with tubular magazines, but not so well with box magazines. There are ways to work around this problem by carefully placing the cartridges in the magazine, as was done by the Lee Enfield and Mosin-Nagant rifles, which we saw in the last post, but these rifles have relatively small sized box magazines with less capacity.

Since box magazines can fit more cartridges in a smaller package than tubular magazines or revolvers, by the end of the 19th century, more and more weapons (especially military weapons) began to feature them and with increasing magazine capacities as well. Therefore, the cartridge rim type needed to be fixed to work well with larger capacity box magazines. There were two different cartridge rim types that were developed to fix this issue:

1. Semi-rimmed type
2. Rimless type

Semi-rimmed cartridge: This was one of the first attempts to fix the issue with rimmed cartridges and box magazines. The diameter of the rim is slightly larger than the case diameter, but only marginally so. 

Click on the image to enlarge. Public domain image.

The rim is still used for headspacing the cartridge to the proper depth in the chamber. However, since the diameter of the rim is barely larger than the case, there is less interference with the rim of the next cartridge in the magazine. The rim is wide enough that it is also used by the extractor to pull the cartridge out of the chamber. Examples of semi-rimmed cartridge include the .38 ACP (as illustrated above), the 6.5x50 mm. Arisaka cartridge, the .401 Winchester etc. This type of cartridge is not seen much since the rimless type of cartridge (which we will see below) was developed, but there are still some new cartridges of this type, for instance the .500 S&W Magnum cartridge developed in 2003.

A .500 S&W Magnum cartridge. Click on the image to enlarge.

Image licensed under the Creative Commons Attribution-Share Alike 3.0 Unported by Peter Gnanapragasam

The .500 S&W Magnum rim is used to headspace the cartridge properly in a revolver, but it can also be used in other magazine types because it is a semi-rimmed cartridge.

As manufacturing technologies for cartridges improved, it became possible to manufacture cartridges accurately enough to headspace off the case mouth (for straight cartridge cases) or case shoulder (for bottlenecked cartridge cases). This led to the development of another cartridge type: the rimless type.

Rimless cartridge: Despite the name, rimless cartridges do have a rim. However, in this type of cartridge, the diameter of the rim is almost the same as that of the cartridge case body. There is only one purpose of the rim: it is used by the extractor to pull the cartridge out of the chamber. There is a groove between the rim and the case body, into which the lip of the extractor can engage to pull the cartridge out,

Since the diameter of the rim is the same as that of the case, obviously we cannot use the rim for headspacing the cartridge in the chamber. So how does it work for these cartridges? The following images show us how this is done:

In the case of straight cartridge cases, the case mouth is not crimped onto the bullet, as is done with revolver cartridges. This leaves a little projection in the case mouth that can be used to headspace the cartridge in the chamber correctly:

Click on the image to enlarge. Public domain image.

The above image shows a .45 ACP cartridge loaded into the chamber. Since the cartridge rim is the same diameter as the case body, this cartridge is headspaced against the throat of the cartridge.

Another way to do it is to shape the cartridge into a bottle-neck shape. For this type, the headspacing happens against the shoulder of the cartridge.

Click on the image to enlarge. Public domain image.

As you can see in the image above, the contact point at the shoulder of the cartridge ensures that the cartridge fits into the chamber at the proper depth.

As manufacturing technologies of cartridges improved in the late 1890s, it became possible to mass produce rimless cartridges that would headspace correctly. The rimless cartridge type quickly became the most popular type of cartridge and has remained so to the current day. Since it has no protrusions to complicate the feeding process, the rimless cartridge type has become well suited for most higher capacity modern magazine types, e.g. box magazines, drum magazines, ammunition belts etc. The easier feeding process also made it possible to produce modern rapid-firing weapons, such as machine guns, sub machine guns etc. Some early rimless cartridges include the 9x19 mm. Parabellum pistol cartridge (Luger cartridge), the .30-03 cartridge from 1903, followed by the .30-06 from 1906, the .45 ACP designed by John Browning in 1904 etc. All these cartridges are still widely used currently, along with more modern designs, such as the 7.62x51 mm. NATO / .308 Winchester and 5.56x45 mm. NATO / .223 Remington cartridges.

In our next post, we will study a couple more types of cartridge rims.