Showing posts with label Pistol. Show all posts
Showing posts with label Pistol. Show all posts

Monday, November 16, 2015

The Pencil Test

Imagine you're looking at a used pistol with an intent to purchase it. If it has been well used, chances are that some parts may be worn out or broken. One part, in particular, is the firing pin, which may be broken, bent, blunted etc. Another part of interest is the mainspring, which may have lost some of its strength. Or perhaps you stripped your pistol in order to clean it, and you aren't sure if you put it back together properly. There is a simple test to verify that the firing pin and mainspring are working satisfactorily and this test is the pencil test, which we will study about today. The only tool you'll need to conduct this test is a pencil with an eraser tip on one end:

A standard #2 size pencil. Click on the image to enlarge. Public domain image.

  1. First, make sure the pistol is empty.
  2. Cock the pistol, making sure that it is still empty.
  3. Insert a pencil with the eraser end first into the barrel and push it as far as it will go (do not force it, just push it in gently). For best results, use a new wooden pencil (such as a standard #2 size pencil, like the one pictured above), with the eraser in good condition
  4. Hold the pistol vertically, with the barrel end aimed upwards.
  5. Make sure that the pistol is indeed empty, then pull the trigger.
  6. If the firing pin and mainspring are working correctly, the pencil will move noticeably. In many pistols models, the pencil will actually come shooting out of the barrel. If the pencil doesn't move, or only moves weakly, there may be a problem with the firing pin or mainspring.
This test works on various pistol models, both hammer-fired and striker-fired types. Of course, the distance that it comes shooting out of the barrel depends on the model of pistol and also the wear and tear of the parts. For 1911 pistols in good condition, the pencil should come flying out and go at least a few feet up in the air. Glock pistols will also propel the pencil out a good amount of distance, but generally not as far as a 1911. Of course, the test also depends on the shape of the firing pin and the hardness of the eraser. For instance, in some models of M&P pistols, the firing pin may pierce the eraser instead of shooting it up. In such cases, if the pencil is put in with the unsharpened end in first, it may come flying out better. Alternatively, a plastic ballpoint pen, such as a Bic, may be used. In general, hammer fired pistols tend to propel the pencil out farther than striker fired models.

For pistols that are equipped with decocking levers (such as Sig Sauer, Ruger P95, Beretta M9 etc.), a similar test may be used to ensure that the decocking safety mechanism is working properly. As before, the pistol is cocked and the pencil is pushed in as before and the pistol is held vertically. Then, instead of pulling the trigger, the decocking lever is pushed instead. If the decocker is working correctly, the pencil should not move at all. If it moves, that means the decocker is not working properly and the firing pin is contacting the eraser.

Now on to some videos, so that you can see what it looks like.

The first video is from user Sadie Thorne on youtube and shows a quick test with a 1911 type pistol.


This video comes with no explanation, but shows the test very nicely. Notice how far the pencil comes flying out of the barrel, when the trigger is pulled.

The next video is by stdlfr11 and shows the same test done using a CZ-75 pistol.


This video has the user giving an explanation of the test, as it is being done. Note that while the pencil moves noticeably, it doesn't move as far as the one in the previous video. The reason for this becomes clear when the user pulls the pencil out as you can clearly see the indentation that the firing pin made on the eraser, which could explain why it didn't fly out as much. If the eraser had been harder or if the user had put the pencil in with the unsharpened end first, it would probably have flown out of the barrel much better. The test does show that the firing pin is functional and is not broken.

So there you have it, a simple test using a pencil ensures that the firing pin and mainspring are working satisfactorily.


Friday, July 3, 2015

Handgun Shooting Analysis

In today's post, we will study the causes for inaccuracies when people shoot handguns. There is a handgun shooters chart, that helps shooters analyze what they are doing wrong. There are various variations of the same chart, but here's one public domain version, as designed by the US Army Marksmanship Unit.

Handgun Shooting Analysis chart, courtesy US Army Marksmanship Unit. Public domain image.


The above chart is designed for a right handed shooter. For a left handed shooter, the chart is mirrored vertically (e.g.) "Thumbing" is on the left, "Finger not on trigger correctly" is on the right etc.

The chart is pretty self-explanatory. For instance, if a right handed shooter is shooting too much to the left of the target, he or she is not placing the finger on the trigger correctly. However, some of these terms may need some explanation, so we will study those below.

Thumbing: When the shooter is squeezing the trigger, he or she pushes the right thumb and/or left thumb against the side of the frame, causing the front of the handgun to aim to the right (for a right-handed shooter. A left handed shooter will push the front of the handgun to the left). This causes the shots to end up to the right of the target.

Tightening grip when pulling the trigger: The shooter is tightening their hands along the grip, as the trigger is being squeezed. This causes the front of the gun to dip low and to the right.

Breaking wrist: This is caused because the shooter anticipates the recoil of the gun and does not lock the strong wrist properly. If the shooter tries to mimic the recoil, he or she breaks the wrists upward and shoots above the target. If the shooter tries to counteract the recoil, he or she breaks the wrists downward and the gun fires below the target.

Jerking: This happens when the shooter tries to fire the trigger as soon as the moving sights cross the target, adding excessive pressure to the trigger. This causes shots to end up low and to the left of the target.

Finger not on trigger correctly: This is caused when there is too little finger on the trigger. The trigger finger should cause the trigger to pull straight backwards. However, if there is too little finger area on the trigger, it will pull the trigger sideways and cause the shot to end up to the left of the target.

Pushing: This happens when the shooter jerks the trigger finger forward, just as the gun fires. The solution is to practice a proper follow-through and hold the gun steady during and after the trigger is pulled.

Heeling: This is caused by the shooter putting too much pressure with the heel of the hand, while the weapon is being fired.


Thursday, May 7, 2015

Weapons of Pirates

In our last post about Queen Anne pistols, we mentioned that they were carried by some pirates, notably the famous pirate captain, Edward Teach, better known to the world as "Blackbeard". In today's post, we will study the world of the pirates and the weapons they carried.

First, pirates have been around practically since man learned to build boats. Pirates have been mentioned in ancient Babylonian and Egyptian texts dating back to 1400 BC. The Greeks and Romans battled pirates in the Mediterranean sea. In fact, the word "pirate" is from the Greek word, pieraomai which means "attempt" (i.e. "attempt to rob for personal gain"), which morphed to the Greek word pierates which means "bandit" or "brigand", from which we get the Latin word pirata, from which we get the English word "pirate".  In the middle ages, the Vikings roamed the northern seas, but also sailed as far south as North Africa and Italy and sailed up rivers all the way up to the Black sea. The South China sea and the area between Malaysia and the Indonesian islands have had incidents of piracy since about 900 AD. In modern times, we have pirates off the coast of Somalia and in the strait of Malacca.

However, we will concentrate mainly on the weapons used by pirates during the so-called "Golden Age of Piracy", which happened around 1650-1730 AD. This was around the time that various European powers were competing with each other to build colonies and trade routes around the world. During this time, several notorious pirates were based off the Caribbean islands, but there were others who sailed around the coast of Africa and even as far as India. In fact, the biggest robbery ever made during the Golden Age of Piracy was by English pirate Henry Every (also called Henry Avery or Long Ben Every), who captured a couple of the Indian Mughal emperor Aurangzeb's ships in the Arabian sea, sailing back from Mecca to India loaded with jewels. With this single act of piracy, Henry Every became the richest pirate captain in the world, but he is not as well known as other pirates such as Blackbeard, Calico Jack Rackham, Bartholomew Roberts (a.k.a Black Bart), Henry Morgan, Captain Kidd etc. We will study the weapons used by pirates living in this era. By the way, not all pirates were English. Many were Dutch, French, Spanish, Portuguese, Danish, Swedish, Irish, Scottish, Welsh, German, American, Italian, Moors, Algerians, Africans, Turks, Arabs, Native Americans, Chinese, Malays etc.

It may come as a surprise to readers to find out that during the Golden Age of Piracy, many pirate ships actually operated more democratically than most countries. Every man on board a pirate ship had an equal vote and the pirate captain was elected by the members of the ship. If the pirate captain didn't perform his duties well, he could be voted out of his position as well. The quartermaster was also voted into power by the crew. One more interesting thing was that the pirate captain only commanded the ship when they were in combat. If they were not in combat, it was the quartermaster and not the captain, that decided where the ship would sail next. Pirate crews were generally promoted based on merit (unlike European navies, where most officers bought their positions). Pirates also came from different countries, races and religions, but they all had an equal right to vote and an equal share of the treasure. At a time where most people worked as slaves or as indentured servants, pirates actually signed work contracts when they joined a pirate ship. The contracts specified how much share of the plunder each man would receive (skilled sailors received more than unskilled men, as did specialized jobs such as captain, quartermaster, carpenter, surgeon, navigator, boatswain, gunner etc.), compensation to be paid in case a man was injured  or killed while performing his duties (workman's injury compensation in the 17th century!), how prizes were to be divided, awarding of bonuses for good work, the rules of conduct expected of each man and the penalties that would occur, if a man was to break the rules.

In many Hollywood movies, we see pirates fighting each other with sabers and showing some real fancy sword fighting skills. And while pirate ships are approaching merchant ships, they engage in heavy gun battles with cannons until the pirates can swing over to the other ship on ropes. So, is what we see in Hollywood movies really how pirates fought? The answers are very different.

Some of the laws and rules followed by pirates have been recorded by historians. From the contract signed by pirates who sailed under Bartholomew Roberts, we have the following section:

Article V - Every man shall keep his piece, pistols and cutlass at all times, clean and ready for action.

So what does the above sentence mean, particularly the three words in bold font? It gives us a clue as to what weapons pirates actually used. Notice that the cutlass (a short sword) comes third in the list, while "piece" is listed first. We will see what this means in the next few paragraphs.

First, let's deal with the question of swords. Pirate ships and merchant ships were very crowded at all times, with boxes and ropes all over the deck. Therefore a long sword was usually not very useful in combat aboard a ship, because there was usually no room to swing a long sword properly. Secondly, it takes a long time to train a person to use a sword well and only members of the aristocracy could afford to take sword fighting lessons (i.e. fencing lessons). Only a rich person could afford to buy a high quality long sword anyway. Third, long swords are heavy and can make a man tired much more quickly. Therefore, real pirates usually carried a short sword, such as a cutlass, which was much more suitable for fighting in close quarters. Alternatively, they carried axes or knives, since both were cheaper than swords and could also be used well in crowded spaces. However, none of these bladed weapons were usually their first choice of weapon either.

Now let's talk about cannon on ships. Most pirate ships were relatively small and could therefore carry small cannon only. Pirates would usually try to capture ships with as little damage as possible, so that they could take the captured ship and its supplies for themselves. So when they fired cannon at merchant ships, they usually fired small caliber shot to try and disable the crew, or fired chain shot to try and destroy some of the sails, to slow the ship down. They would also shoot warning shots away from the target, to try to get the merchant ships to surrender quietly. They usually never shot large solid cannon balls directly at ships, because this could cause the ship to sink before they captured it. If possible, pirates preferred to capture ships as undamaged as possible, so that they could use them in their own fleets.

Now let's talk about the word "piece" that we saw earlier. The word "piece" refers to a "fowling piece" or a "hunting piece", i.e. a musket used for hunting birds and animals. In general, a "piece" in pirate language, could refer to any long arm, whether musket, rifle, arquebus or blunderbuss. These were usually the first weapon of choice for pirates.

The musket was generally available to the common man during the Golden Age of Piracy era, so it was pretty easy for pirates to get their hands on them. A well trained pirate crew could injure or kill several defenders from longer ranges, so that there would be less resistance by the time they boarded the ship. They would target officers, sailors operating the sails and those near the gun ports. Well aimed musket fire in volleys could inflict maximum damage to their opposition, without sinking their ship, which is why pirates preferred using muskets to cannon.

A typical flintlock musket. Click on the image to enlarge. Public domain image.

These muskets were originally designed to hunt bird and animals and were pretty sturdy, with long heavy barrels. While many of them were originally smoothbore, they were still capable of relatively accurate fire. Pirates would sometimes load them with one larger ball about the size of the barrel bore and two smaller balls about half the bore size. This was done to increase the probability of hitting the target. Successful pirate crews carried multiple muskets for each pirate, up to four or five per pirate, and they would all be loaded and ready to go, as they approached their prey. This allowed the pirates to keep shooting rapidly at their prey as they approached it. They would also work in teams, where one pirate would fire muskets, while the other pirates would reload them.

The musketoon is a shorter barreled version of the musket and were more preferred, because they were easier to handle in confined spaces, such as those found on ships. Some musketoons had flared barrels like the next weapon, the blunderbuss, although the blunderbuss was generally even shorter.

A Blunderbuss. Note the flared muzzle.

The original term for this weapon was donderbuss and this name appears to be Dutch. The word "donder" means "thunder" and "buss" means "pipe" in Dutch and German languages. They were generally made with brass or bronze barrels, since these resisted corrosion from seawater better than iron barrels. The flared muzzle allowed the user to quickly pour powder and shot down the barrel and load the weapon easier on a moving platform. Pirates would load blunderbusses with multiple shot pellets, scrap nails, rocks etc., and use them at closer ranges. On a crowded deck, a single shot could disable a group of enemies, so they were used to clear a path so that the pirates could board.

As they boarded their enemy's ship, pirates often carried multiple pistols with them. Many of these were single shot flintlock models and quite a few of them were built with flared barrels like a blunderbuss. to enable quicker reloading.


These pistols often had decorations around the muzzle that looked like a dragon's mouth and hence, these pistols were called "dragons". Military troops that carried such pistols were called "dragoons" and the pistols were then referred to as "dragoon pistols".

There were also general purpose flintlock pistols that many pirates carried, as these were also easily available.

A typical British flintlock pistol designed for naval service. Click on the image to enlarge. Public domain image.

In addition to these, some pirates also carried Queen Anne pistols, which we saw in the previous post. This is because Queen Anne pistols were designed to hold the ball inside the barrel without any wadding and there was much less risk of the ball or powder falling out of the pistol.

These pistols were used practically at point-blank range. Since they were all single shot models, pirates usually carried several of them, either tied around their necks with short pieces of rope, or tucked into a belt. The butt of the pistol handle was often a heavy brass plate (as the two examples above show), so after the pistol was fired, the user could turn it around and use it as a club.

In some cases, they would carry multi-barrel pistols. Some of these were just pistols with multiple barrels and separate triggers to fire each barrel separately. Other models featured a single trigger and multiple barrels that could be turned into position as needed.

A pistol with two separate barrels, two flintlocks and two triggers. Click on the image to enlarge.

An over under pistol with two barrels, two pans, but a single flintlock and single trigger. Each barrel was rotated into position by hand and then fired.

There were also volley fire weapons that could fire multiple pellets in different directions simultaneously, so as to spread the damage with a single shot. An example of such a pistol is shown below.

A duckfoot pistol. Click on the image to enlarge. Public domain image.

The example shown above is a duckfoot pistol using a flintlock firing mechanism. It is called a "duckfoot" because it resembles the foot of a duck. In general, multi-barrel pistols were less reliable than single barrel pistols and therefore, they were not frequently used.

Finally, there was the pirate short sword, the cutlass. This was usually the third weapon of choice and pirates usually didn't use them unless they really needed to. Forget the long drawn out sword battles shown in Hollywood movies, real pirates kept the fighting time down to a minimum. Real pirates would carry a cutlass with one hand and a pistol with the other. The cutlass would be used to block the opponents sword, while the pirate's other hand would fire the pistol at point-blank range. Sometimes, the pirate would use a combination weapon that combined a cutlass and pistol together.

A combination of cutlass and pistol. Click on the image to enlarge.

This allowed the pirate to both shoot and cut with a single arm, while the other arm could carry another pistol or a grenade or some such object.

Besides these three weapons, pirates often carried axes, knives, grenades, stink pots etc. However, most pirates preferred using (in order of preference): long guns (such as muskets, rifles and arquebuses), close range powerful shotgun type weapons (musketoons, blunderbusses), pistols and finally swords, axes and knives. Therefore, the Hollywood myth of pirates preferring to use swords and fighting long duels on decks with swords is completely false. They preferred using firearms to bladed weapons.

Now, let us look at a curious paragraph in the contracts signed by pirates that sailed with the pirate captains Edward Low and George Lowther around 1720 AD.

Article VIII - He that sees a sail first, shall have the best Pistol or Small Arm aboard of her.

As you can see, the contract clearly states that the first pirate to see the sail of a merchant ship, would be rewarded with the best firearm found on the captured ship, not the best sword. Therefore, they clearly valued firearms more than swords.

Monday, May 4, 2015

Queen Anne Pistols

In today's post, we will look at a type of pistol that was around in the late seventeenth and eighteenth centuries: the Queen Anne pistols (otherwise called turn-off pistols). These were generally in use from around 1650 to 1780 AD.

First, we will investigate the origin of the name. The first models of this type of pistol date back to around 1650 or 1660 AD in England, but they really started becoming popular during the reign of Queen Anne of England (she was born in 1665 AD and ruled England from 1702 to 1714 AD). This is why they are popularly called as Queen Anne pistols.

So what makes these pistols different from other pistols of the era? There were several features unique to these pistols which we will study:

  1. The breech and lock of a Queen Anne pistol were forged together as a single piece, a feature that did not become common in firearms until the middle of the nineteenth century.
  2. Unlike most weapons of this era which were loaded from the muzzle, most Queen Anne pistols were loaded from the breech.
  3. The barrel of a Queen Anne pistol was screwed on to the chamber. This was one of the key distinguishing features of a Queen Anne pistol.
  4. The barrel was tapered from the breech to the muzzle.
  5. The caliber of the bullet ball was made larger than the bore of the barrel. Since these pistols were loaded from the breech, there was no need to use a ramrod or wadding, unlike most other firearms of the era.
  6. Though early model barrels were smoothbores, later models featured rifled barrels for better accuracy.
Like most firearms of that era, these pistols used flintlock firing mechanisms. The barrels of most models of Queen Anne pistols were shaped like miniature cannon barrels. 

A Queen Anne Pistol. Click on the image to enlarge.
Image is  licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license by Trulock at Wikipedia

Queen Anne type pistol made by Galliard in Lausanne, Switzerland around 1760. Click on the image to enlarge.
Image is  licensed under the Creative Commons Attribution-Share Alike 2.0 France license.

To load this type of pistol, the user would first unscrew the barrel from the chamber (this is why they are also called turn-off pistols). The chamber is designed to be long and narrow, with a cup on top. After unscrewing the barrel, the user would load some black powder into the chamber and then place a bullet ball on to the cup. Then the user would screw the barrel back in place and tighten it with a key. Notice that the barrel is tapered from the breech to the muzzle. This is a deliberate feature. The diameter of the bullet is larger than the diameter of the barrel at the breech, therefore it cannot roll out through the barrel. The bullet stays in place on the cup and holds the black powder in the chamber, without using any wadding.

When the user pulls the trigger, the flintlock mechanism ignites the black powder in the chamber, which burns and produces high-pressure gas in the chamber. The hot gases push the bullet out of the cup and through the barrel. Since the barrel is tapered from the breech to the muzzle, the bullet is deformed as it is pushed out of the barrel. The bullet forms such a tight seal within the barrel that the high pressure gas gives the bullet much more velocity than muzzle loaders of that era.

In some early models, the barrels were smoothbore, but later models began to feature rifling in the barrel, in order to improve accuracy. This meant that they had higher velocity and better accuracy than most other pistols of that era. Although some infantry officers carried them for close range fighting, these were not used much as military weapons, because they took longer to load than muzzle loaders and could not be easily re-loaded in the middle of combat. Therefore, the majority of purchases were by civilians. 

These pistols originated in England, but also spread to France, Switzerland etc. Several of them were used by Americans during the American Revolution. It is thought that most of these came into American hands after the Siege of Boston. 

The nice thing about such pistols was that most of them were made in sizes that could be easily stowed in a coat pocket, or tucked into a belt, thereby allowing them to be easily concealed. This is why they became popular among civilians as a self-defense weapon. Many were owned by rich people and therefore, quite a few examples are highly decorated with silver and gold engravings.

These pistols were also popular with pirates, The infamous pirate, Edward Teach, better known to the world as "Blackbeard", has been depicted in several portraits, carrying a number of these pistols around his body.

The pirate captain Edward Teach, alias "Blackbeard". Notice the pistols tucked into his belt.

The character, Jack Sparrow, in the Pirates of the Caribbean series of movies, also carries a Queen Anne type pistol and hands it to Angelica in the movie, Pirates of the Caribbean: On Stranger Tides.

Now, we present a small movie showing the features of this pistol:


Happy viewing!


Sunday, February 16, 2014

Colt .45 M-1911 A1-67 Pistol Denix Replica











Colt .45 M-1911 A1-67 Replica Pistol

A full size solid all metal Denix replica of the famed 1911 Colt M-1911 A1-67 Auto Loading Pistol from the U.S. With working slide action and magazine black finished with chequered grips.

Cost £89 in early 2000's from Battleorders.com

The M1911 is a single-action, semi-automatic, magazine-fed, recoil-operated pistol chambered for the .45 ACP cartridge,which served as the standard-issue sidearm for the United States Armed Forces from 1911 to 1985. It was first used in later stages of the Philippine-American War, and was widely used in World War I, World War II, the Korean War, and the Vietnam War.

Overall this is a very nice reproduction, well built, but cheap too, full working action, feels and looks just like the real thing.

Subscribe to my Youtube channel - WeaponCollector Youtube
And follow me on twitter - WeaponCollector Twitter


Please feel free to leave a comment letting me know what you think! Thanks.



Tags : Colt .45, ACP, 1911, M-1911 A1-67, U.S.A, Auto Loading, Pistol, replica, reproduction, copy, single action, gun, firearm, army,

Friday, February 14, 2014

Crosman 2240 vs HW45 Comparison Video



Crosman 2240 and HW45 Comparison Video -

A test and comparison of the .22 Crosman 2240 co2 pistol and the .22 HW 45 Weihrauch Spring Piston Pistol.

Tests include Size, Weight, Accuracy, Noise, Penetration and Recoil.

GUN DETAILS : 

HW45 -

Overall Length - 11.0"
Barrel Length - 6.7"
Rifling - 12 grooves
Calibers Available - .177, .20, .22
Weight - 2 lbs 8.8 oz
Rear Sight - adjustable for elevation and windage
Sight Radius - 9.38"
Scope Groove - 5.1" of usable length
Grip - Walnut
Safety - manual lever type
Price around £170+

Crosman 2240 -

Length - 11.13"
Model - 2240
Type - Bolt action single shot
CO2 Powered
Caliber - .22
Velocity - 460 fps
Weight - 1.8lbs
Sights - Front fixed, rear adjustable for windage and elevation
Scope mount via barrel clamp mount
or aftermarket grooved receiver
Stock - Black molded plastic
Safety - Manual crossbolt
Trigger Single stage non-adjustable
Retail price around £100

Results are in the video - all I can say is both guns are well worth owning and each has its pros and cons over the other gun.

Subscribe to my Youtube channel - WeaponCollector Youtube
And follow me on twitter - WeaponCollector Twitter


Please feel free to leave a comment letting me know what you think! Thanks. 

tags : Guns, air guns, air pistols, co2, spring, HW45, Crosman 2240, review, tests, comparisons, overview, video, testing,

Thursday, March 15, 2012

How to make a Resetting Air Rifle / Pistol Target - PART 1

The Finished Resetting Target










How to make a Resetting Air Rifle / Pistol Target - PART 1

Tools and Materials : Wood Saw, drill and some small and large drill bits and a large 2" wood cutting drill bit, Tin Snips / Shears, hammer, hacksaw, vice, glue, Some scrap wood, atleast 3ft x 4ft (I used Pine) also some dense wood like Plyboard - about 15cm x 30cm should do, various screws (large and small) some screw-in eyelets and some washers, a spring, 1ft of copper tubing, and 1ft of threaded rod or similar rod that will fit inside the copper tube, 1ft x 3/4" steel 3mm thick, and some tin - 1mm or 2mm (I used 3 fence post brackets, but any tin will do)
All Materials are featured in the pics above and any similar type of materials will do for this project.

To Start - Take two bits of tin 8" 1/2 x 2" 1/2, place together as shown in pic three and draw on two 2" circles in the centre that are 2" apart and then cut out using the tin snips or any way you like.
Then drill various small holes in the tin to secure it to the wood base using screws, as shown in pic five

Once done cut a piece of pine wood or what ever you have to 10" x 5", place you tin on the woods as a template and draw where the holes are, then using the 2" drill cut out the holes as shown in pics six and seven.
Once cut out screw the tin onto the wood as shown in pic seven.

Now cut two bits of wood 7" x 10" 1/2 for the sides and glue and screw onto the front plate as shown in pics eight and nine and cut a board 10" x 6" 1/4 for the base and glue and screw that on too.
Then cut two bits of  tin 4" x 3" 1/4  and also one bit of the denser wood the same size - 4" x 3" 1/4,
at the same time get your eyelets and  put one in the middle of the front plate at about 7mm high, then add a screw to the plyboard plate ( the 4" x 3" 1/4 one) slip the screw over the eyelet and then add the other eyelet about 5mm above the top of the plyboard plate (last pic) and add a screw and washer as shown, this creates a hinge , make sure your plate is swinging o.k.

This is the end of PART 1 , part two is HERE

Please feel free to leave a comment if you need help or just want to discuss this topic. Thanks!!

TAGS : Homemade Air Rifle Pistol Resetting Target dueling duelling tree Shooting Sport Range DIY home made easy to follow tutorial howto how make swing swinging resetable .22 .177 auto reset scrap materials airgun air gun

Sunday, August 21, 2011









Pakistani Arms Industry
                          Ministry of Defense and Production, was created in September 1991 to promote and coordinate the patchwork of military production facilities that have developed since independence. The ministry also includes seven other specialized organizations devoted to research and development, production, and administration. The navy is supported mainly by a facility at the Karachi Shipyard, which has limited production capacity. In 1987 development of a submarine repair and rebuild facility at Port Qasim was begun. By early 2000, in a joint project with China led to the development of the JF-17 Thunder fighter and the Al-Khalid Tank. Pakistan also has taken major steps to becoming self sufficient in aircraft overhaul, modernization and tank and helicopter sales and a transfer of technology with France led to the construction of the Agosta B-90 Submarine in the late 1990s and early 2000s and is currently actively participating in many joint production projects such as Al Khalid 2, advance trainer aircraft, combat aircraft, navy ships and submarines.